FACULTY OF TECHNOLOGY AND METALURGY

XXIV CPA&G SYMPOSIUM

FACULTY OF TECHNOLOGY AND METALURGY

24th international symposium CPA&G

24th International symposium in the field of pulp, paper, packaging and graphics will be held in Belgrade,
Chamber of Commerce and Industry of Serbia, Terazije 23, Belgrade, Great Hall on the 2nd floor, June 21st – 22nd, 2023.

Symposium is organized by Center for pulp, paper, packaging and graphics industry of Serbia and Faculty of Technology and Metallurgy in Belgrade, under the patronage of Ministry of Education, Science and Technological Development of Republic of Serbia, The Town of Belisce (Republic of Croatia) and Chamber of Commerce and Industry of Serbia.

XXIV SYMPOSIUM - CPAG 2023 - PROGRAM

THE MAIN GOALS OF THE SYMPOSIUM ARE:

  • To gather experts engaged in the pulp, paper, packaging and graphic industry, as well as representatives of academic institutions and, with the assistance of foreign lecturers (representatives of international companies), to deliver information about new technologies and new operations and processes in existing technologies, which could enable price cuts and quality improvement of products, followed by better preservation of the
  • To give chance to our experts to present results they have achieved in their recent work, as well as to review the possibilities to create quality products demanded by world market with small investments in existing equipment and improved organization of their companies.

TOPICS OF SYMPOSIUM ARE:

  • New technologies and trends in production processes in the pulp and paper industry to increase business efficiency;
  • New materials, technologies and trends in the packaging and graphics industry;
  • Standards and regulations in the paper, cardboard and packaging industry – international ecological standards and certifications;
  • Ecology and environmental protection in the PPPG industry;
  • Waste management: reuse and recycling;
  • Waste paper as a strategic raw material;
  • Renewable energy sources;
  • Saving energy in technological processes;
  • Energy efficiency and energy management in pulp, paper, packaging and graphic industry: Energy – Efficiency – Ecology – Economy;
  • Circular economy in pulp, paper and packaging industry;
  • Examples of good practice and existing solutions in the industry;
  • Education for pulp, paper, packaging and graphic industry – needs and opportuniti

SYMPOSIUM PROGRAM CONSISTS OF:

  • Plenary lectures (20+5 minutes for discussion);
  • Other lectures (15+5 minutes for discussion);
  • Promotions of technology and products of local and foreign companies (as agreed);
  • Round table – discussions on selected present

XXIV SYMPOSIUM - CPAG 2023 - ANNOUCEMENT AND CALL FOR PAPERS

Instruction for writting papers

The papers presented on symposium will be printed in the Proceedings, as camera ready, without proofreading.

Invited lectures should include up to 10 A4 pages, other lectures up to 8 of typed text, including pictures and other attachments.

The authors will be provided with: video projector, computer, sound system and screen. Should the authors have some special requests,

 they are asked to note it in advance. Works must be delivered as camera-ready Microsoft Word files.

Please prepare your papers according to the following instructions:

A4 format, all margins 2,54 cm, font Calibri Light, single spacing, the first line of each text paragraph indented by 1,27 cm.

Apply the styles in the following order:

 MAIN TITLE (capital letter, 16 pt, bold); authors (12 pt); company / institution name followed by city and country (12 pt); abstract  (up to 7 lines, 12 pt, italic); key words (12 pt, bold italic); numbered chapter title (12 pt, bold).

For example: INTRODUCTION, 12 pt,  bold; text of the paper (12 pt); references (11 pt, italic). Please insert all illustrations and tables into the document, at appropriate places, with figure captions below pictures, and table titles above tables (11 pt, italic). Photographs should be converted to grayscale with a minimum resolution of 200 dpi for final size, and saved as tiff or jpg (without compression-maximum quality). Drawings should be saved as “1-bit” tiff with a minimum resolution of 600 dpi for final size.

At the end of the document state name(s) and full postal and e-mail address of corresponding / presenting author.                             

Accepted papers will be printed in Proceedings.

TEMPLATE for papers that authors should sent to the Symposium can be downloaded HERE

Symposium Committees

Prof. Slobodan Jovanovic, Ph. D., Faculty of Technology and Metallurgy, (TMF) Belgrade, Serbia, chairman
Prof. Petar Uskokovic, Ph. D., TMF, Belgrade, Serbia
Prof. Juha Leimu, Ph. D., Turku University of Applied Sciences, Turku, Finland
Prof. Nenad Milosavljevic, Ph. D., Faculty of Chemical Engineering, Åbo Academy University, Turku, Finland
Prof. Paul H. Wilson, Ph. D., TAPPI Pulp & Paper Safety Committee, Norcross, Georgia, USA
Prof. Valentin I. Popa, Ph. D., Faculty of Chemical Industry, Iassi, Romania
Prof. Stanka Nedeva, Ph. D., Pulp and Paper Institute, Sofia, Bulgaria
Prof. Krasimir Savov, Ph. D., Pulp and Paper Institute, Sofia, Bulgaria
Daven Chamberlain, Ph. D., Paper Industry Technical Association – PITA, Lancashire, United Kingdom
Prof. Vilko Ziljak, Ph. D., Faculty of Graphic Arts of the University of Zagreb, Zagreb, Croatia
Prof. Ivana Ziljak Stanimirovic, Ph. D., Faculty of Graphic Arts of the University of Zagreb, Zagreb, Croatia
Prof. Anastasios E. Politis, Ph. D., University of West Atica and Hellenic Open University, Athens, Greece
Prof. Predrag Zivkovic, Ph. D., TMF, Belgrade, Serbia
Prof. Djordje Janackovic, Ph. D., TMF, Belgrade, Serbia
Prof. Ivanka Popovic, Ph. D., TMF, Belgrade, Serbia
Prof. Melina Kalagasidis Kruscic, Ph. D., TMF, Belgrade, Serbia
Prof. Mirjana Kijevcanin, Ph. D., TMF, Belgrade, Serbia
Prof. Mirjana Kostic, Ph. D., TMF, Belgrade, Serbia
Prof. Zorica Knezevic-Jugovic, Ph. D., TMF, Belgrade, Serbia
Prof. Zeljko Kamberovic, Ph. D., TMF, Belgrade, Serbia
Prof. Vladimir Valent, Ph. D., TMF, Belgrade, Serbia
Prof. Srecko Nikolic, Ph. D., TMF, Belgrade, Serbia
Prof. Goran Jankes, Ph. D., Faculty of Mechanical Engineering, Belgrade, Serbia
Prof. Milos Djukic, Ph. D., Faculty of Mechanical Engineering, Belgrade, Serbia
Branko Dunjic, Ph. D., Cleaner Production Centre of Serbia, TMF, Belgrade
Prof. Borislav Jeftenic, Ph. D., Faculty of Electrical Engineering, Belgrade, Serbia
Prof. Milan Bebic, Ph. D.D., Faculty of Electrical Engineering, Belgrade, Serbia
Marko Jagodic, BSc, DITP-Pulp and Paper Engineers and Technicians Association, Ljubljana, Slovenia
David Ravnjak, Ph. D., ICP – Pulp and Paper Institute, Ljubljana, Slovenia
Prof. Hrustem Smailhodzic, Ph. D., Faculty of Technical Studies, Travnik, Bosnia & Herzegovina
Prof. Salim Ibrahimefendic, Ph. D., Faculty of Technical Studies, Travnik, Bosnia & Herzegovina
Prof. Diana Gregor Svetec, Ph. D., Faculty of Natural Sciences and Engineering, Ljubljana, Slovenia
Prof. Klementina Mozina, Ph. D., Faculty of Natural Sciences and Engineering, Ljubljana, Slovenia
Prof. Sefkija Botonjic, Ph. D., Faculty of Metallurgy and Technology, Zenica, Bosnia & Herzegovina
Prof. Milorad Krgovic, Ph. D., TMF, Belgrade, Serbia

Milorad Krgovic, Faculty of Technology and Metallurgy (TMF), Belgrade, chairman
Predrag Zivkovic, TMF, Belgrade
Marina Krsikapa, Center CPA&G, TMF, Belgrade
Natasa Govedarica, CHAMBER OF COMMERCE AND INDUSTRY OF SERBIA, Belgrade
Milos Ljusic, UMKA, Umka
Sasa Dobric, UMKA, Umka
Danijela Osap, UMKA, Umka
Milan Markovic, SMURFIT KAPPA BELGRADE, Belgrade
Ivan Stefanov, SMURFIT KAPPA BELGRADE, Belgrad
Djurdja Radivojevic Cugurovic, SMURFIT KAPPA AVALA ADA, Belgrade
Bojan Bilal, SMURFIT KAPPA BELGRADE, Belgrade
Marija Pantelić, BOSIS, Valjevo
Dinko Buric, The Town of Belisce, Croatia
Denis Pavic, ASTRABEL, Belisce, Croatia
Kseni Rudan Vrbljanin, LOCAL DEVELOPMENT AGENCY, Belisce, Croatia
Mirko Stanic, NATRON HAYAT, Maglaj, Bosnia & Herzegovina
Zoran Petkovic, KARTONVAL, Belgrade
Zoran Devic, PROGRES, Belgrade
Biljana Lazarevic, CASA FORTE, Belgrade
Constantin Secara, SC CEPROHART SA Braila, Romania
Tibor Kiss, HUNTHAI LOGISTICS, Budapest, Hungary
Klemen Mozina, Faculty of Natural Sciences and Engineering, Ljubljana, Slovenia
Milos Petrovic, TMF, Belgrade
Darko Radosavljevic, TMF, Belgrade
Slobodan Jovanovic, TMF, Belgrade, Belgrade

The deadline for abstract submission is extended to May 15, and for sending the complete paper to May 29.

The membership for the symposium is mandatory for all participants and is 150 EUR, and it includes participation in the Symposium, printed copy of Proceedings and the accompanying materials, refreshments during brakes and ceremonial dinner.

Official languages are Serbian and English, and the simultaneous translation will be provided.

TEMPLATE for works that authors should sent to the Symposium can be downloaded HERE

For additional information contact:

Marina Krsikapa, Mobil: +38160 399 8777; e-mail: m.krsikapa@gmail.com  

PRELIMINARY PROGRAM

WEDNESDAY, June 21st, 2023

09:00 – 10:00  REGISTRATION OF PARTICIPANTS AND DISTRIBUTION OF MATERIALS

10:00 – 10:15  OFFICIAL OPENING OF SYMPOSIUM

10:15 – 13:00  WORKING SESSION

14:00 – 15:00  BREAK (LUNCH)

15:00 – 18:00  WORKING SESSION

20:30               CEREMONIAL DINNER

 

THURSDAY, June 22nd, 2023

09:00 – 12:00 WORKING SESSION

13:00 – 15:00 ROUND TABLE

15:00 – 15:15 OFFICIAL SYMPOSIUM CLOSING

16:30              EXCURSION

The venue od 24th international symposium CPA&G

24th International symposium in the field of pulp, paper, packaging and graphics will be held in Belgrade,
Chamber of Commerce and Industry of Serbia, Terazije 23, Belgrade, Great Hall on the 2nd floor, June 21st – 22nd, 2023.

Time limits:

The deadline for abstract submission is extended to May 15, and for sending the complete paper to May 29.

For additional information contact:

 Marina Krsikapa Mobil: +381 60 399 8777; e-mail: m.krsikapa@gmail.com

INVITATION TO INDUSTRY

 After a three-year break due to the pandemic, we are reuniting and we suggest that you be a part of this story. Symposium CPAG 2023 is an opportunity to meet your friends and business partners in one place, but also to meet new ones, with the possibility of promoting your company, technology or product. We hope that you will find interest and help in organizing this gathering, as in previous years.

If you decide to present and promote yourself at the symposium and thereby participate in the work of the gathering, we will send you the possibilities of financial support and participation of your firm, such as: presentation – lecture included in the symposium program; use of exhibition space-stands, which will be located in the hall in front of the congress hall; as well as through the appropriate status you choose, which suits you best (Patron, Contributor or Sponsor).

Contact

Center CPA&G

Scroll to Top
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.